Lexia 3 Pp2000 Software Download Free
Download Lexia Reading For Free
Problem:When connect / Actia psa xs evolution interface with computer, the system warns the error message: “unknown USB device”Solution:One of the diagbox users has worked out an solution to the problem, see this thread:Here is another solution according to our customer’s feedback—modifying the Lexia 3 interface to a new one. We are not responsible for the damage if you do not follow the right procedure.Instruction:Tool needs: a USB cable, two D-SUB connectors, both cheap, so better to get good quality cablesStep 1:Get a 3m USB cable with an “A” connector in each end, and two D-SUB connectors, like picture below:Step 2:Cut the USB cable and two D-SUB connectors to make the end ready for soldering.Step 3:Here is the pinout of the connector, colors are standard.1: Black or yellow pin;7: Green pin;8: White pin;9. D-Sub connector seen from frontStep 4:Connect and solder the cable or connector like this way:Step 5:The new lexia 3 interface was well made. Here is the new cable.Job’s done. Re-connect the modified lexia 3 diagnostic cable with computer and install software.Any questions go to.Posted inTagged,Post navigation.